Krud Kutter MR05 Green The Must For Rust Remover and Inhibitor with Odorless, 5 Gallon

Krud Kutter MR05 Green The Must For Rust Remover and Inhibitor with Odorless, 5 Gallon Review

Krud Kutter MR05 Green The Must For Rust Remover and Inhibitor with Odorless, 5 Gallon Feature

• Removes and prevents rust in one step
• Safe, fast, effective on: rusted or new metal, galvanized, aluminum, stainless steel, cast iron, chrome, brass, plastic, brick, stucco, stone, porcelain, fiberglass, ceramic, glass and more
• Ideal for painting when dry, accepts any primer, paint, coating, etc., and provides a clean surface free of contaminants, which allow a secure bond for coating
• : water-based, biodegradable and non-flammable
• Coverage of 50 sq.ft. per quart or 200 sq.ft. per gallon
• Earth-friendly: water-based, biodegradable and non-flammable

The proprietary (water-based) formulation penetrates into every void of a metal surface and dissolves rust/oxidation through chemical action. Then tiny, rust-inhibiting crystals are formed and become integral with the surface molecules of the metal to resist future rusting. Removes blueing on firearms instantly. Always test first on an inconspicuous area. For best results apply in ambient temperature of 70f or above. On metal, maintain wet solution on surface to remove rust. Once the rust is dissolved, rinse or wipe the surface, and wait one hour or more before painting. Do not allow remover to dry on painted surfaces. For improved paint adhesion on clean metal surfaces, dilute remover 50/50 with water, apply solution, and rinse or wipe the surface. To use as a rust inhibitor on unpainted metal, allow the remover to dry on the surface after the rust is dissolved. The remover will then protect bare metal against rust for up to 12 months. Directions for use: Remove oil and grease from the metal to be treated. Rinse the metal to break the surface tension and wash away loose dirt. Apply the remover by brush, spray or by dipping. Use plastic, glass or stainless steel containers. Disassemble units composed of moveable parts before cleaning. Clean parts and allow to dry before reassembling. Dissolving rust from iron or steel: Apply the remover as required to penetrate the rust. Chemical action begins at once. Cleaning time will vary according to the rust. Medium to light rust will be dissolved in 30 minutes or less, while heavier deposits may require a second application. Caution: Eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention. Do not mix this product with any other chemicals. Keep out of reach of children. Odorless. Container size: 5 gallon.